Gentlemen Ransomware Exploits Vulnerable Driver to Disable Security Software
Summary
Hide ▲
Show ▼
The Gentlemen ransomware gang is using a vulnerable driver to disable security software in enterprise environments. The group employs a bring-your-own-vulnerable-driver (BYOVD) attack to terminate antivirus and extended detection and response (EDR) processes. The ransomware exploits CVE-2025-7771, a high-severity vulnerability in the ThrottleStop driver. The gang has demonstrated advanced capabilities, including tailored bypasses for specific security vendors. The attacks have been observed since this summer, with the group adapting its tactics mid-campaign. The use of legitimate, signed drivers complicates detection and defense. The ransomware was first observed this summer. The Gentlemens have been exploiting vulnerable, Internet-facing infrastructure and VPNs in their attacks. The group uses PowerRun.exe and Allpatch2.exe to escalate privileges and disable security products. Organizations are advised to implement zero-trust controls and monitor for unusual process combinations to defend against these attacks.
Timeline
-
11.09.2025 23:42 1 articles · 17d ago
Gentlemen Ransomware Exploits Vulnerable Driver to Disable Security Software
The Gentlemen ransomware gang has been observed using a vulnerable driver to disable security software in enterprise environments. The group employs a bring-your-own-vulnerable-driver (BYOVD) attack to terminate antivirus and extended detection and response (EDR) processes. The ransomware exploits CVE-2025-7771, a high-severity vulnerability in the ThrottleStop driver. The gang has demonstrated advanced capabilities, including tailored bypasses for specific security vendors. The attacks have been observed since this summer, with the group adapting its tactics mid-campaign. The use of legitimate, signed drivers complicates detection and defense. The ransomware has been exploiting vulnerable, Internet-facing infrastructure and VPNs in its attacks. The group uses PowerRun.exe and Allpatch2.exe to escalate privileges and disable security products.
Show sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
Information Snippets
-
The Gentlemen ransomware gang uses a vulnerable driver to disable security software in enterprise environments.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The ransomware exploits CVE-2025-7771, a high-severity vulnerability in the ThrottleStop driver.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The group employs a bring-your-own-vulnerable-driver (BYOVD) attack to terminate antivirus and EDR processes.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The ransomware was first observed this summer.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The group has demonstrated advanced capabilities, including tailored bypasses for specific security vendors.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The use of legitimate, signed drivers complicates detection and defense.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The gang uses PowerRun.exe and Allpatch2.exe to escalate privileges and disable security products.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
-
The ransomware has been exploiting vulnerable, Internet-facing infrastructure and VPNs in its attacks.
First reported: 11.09.2025 23:421 source, 1 articleShow sources
- 'Gentlemen' Ransomware Abuses Vulnerable Driver to Kill Security Gear — www.darkreading.com — 11.09.2025 23:42
Similar Happenings
XCSSET macOS Malware Targets Xcode Developers with Enhanced Features
A new variant of the XCSSET macOS malware has been detected, targeting Xcode developers with enhanced features. This variant includes improved browser targeting, clipboard hijacking, and persistence mechanisms. The malware spreads by infecting Xcode projects, stealing cryptocurrency, and browser data from infected devices. The malware uses run-only compiled AppleScripts for stealthy execution and employs sophisticated encryption and obfuscation techniques. It incorporates new modules for data exfiltration, persistence, and clipboard monitoring. The malware has been observed in limited attacks, with Microsoft sharing findings with Apple and GitHub to mitigate the threat. Developers are advised to keep macOS and apps up to date and inspect Xcode projects before building them.
ForcedLeak Vulnerability in Salesforce Agentforce Exploited via AI Prompt Injection
A critical vulnerability in Salesforce Agentforce, named ForcedLeak, allowed attackers to exfiltrate sensitive CRM data through indirect prompt injection. The flaw affected organizations using Salesforce Agentforce with Web-to-Lead functionality enabled. The vulnerability was discovered and reported by Noma Security on July 28, 2025. Salesforce has since patched the issue and implemented additional security measures, including regaining control of an expired domain and preventing AI agent output from being sent to untrusted domains. The exploit involved manipulating the Description field in Web-to-Lead forms to execute malicious instructions, leading to data leakage. Salesforce has enforced a Trusted URL allowlist to mitigate the risk of similar attacks in the future. The ForcedLeak vulnerability is a critical vulnerability chain with a CVSS score of 9.4, described as a cross-site scripting (XSS) play for the AI era. The exploit involves embedding a malicious prompt in a Web-to-Lead form, which the AI agent processes, leading to data leakage. The attack could potentially lead to the exfiltration of internal communications, business strategy insights, and detailed customer information. Salesforce is addressing the root cause of the vulnerability by implementing more robust layers of defense for their models and agents.
CISA Emergency Directive 25-03: Mitigation of Cisco ASA Zero-Day Vulnerabilities
The Cybersecurity and Infrastructure Security Agency (CISA) issued Emergency Directive 25-03, mandating federal agencies to identify and mitigate zero-day vulnerabilities in Cisco Adaptive Security Appliances (ASA) exploited by an advanced threat actor. The directive requires agencies to account for all affected devices, collect forensic data, and upgrade or disconnect end-of-support devices by September 26, 2025. The vulnerabilities allow threat actors to maintain persistence and gain network access. Cisco identified multiple zero-day vulnerabilities (CVE-2025-20333, CVE-2025-20362, CVE-2025-20363, and CVE-2025-20352) in Cisco ASA, Firewall Threat Defense (FTD) software, and Cisco IOS software. These vulnerabilities enable unauthenticated remote code execution, unauthorized access, and denial of service (DoS) attacks. GreyNoise detected large-scale campaigns targeting ASA login portals and Cisco IOS Telnet/SSH services, indicating potential exploitation of these vulnerabilities. The campaign is widespread and involves exploiting zero-day vulnerabilities to gain unauthenticated remote code execution on ASAs, as well as manipulating read-only memory (ROM) to persist through reboot and system upgrade. CISA and Cisco linked these ongoing attacks to the ArcaneDoor campaign, which exploited two other ASA and FTD zero-days (CVE-2024-20353 and CVE-2024-20359) to breach government networks worldwide since November 2023. CISA ordered agencies to identify all Cisco ASA and Firepower appliances on their networks, disconnect all compromised devices from the network, and patch those that show no signs of malicious activity by 12 PM EDT on September 26. CISA also ordered that agencies must permanently disconnect ASA devices that are reaching the end of support by September 30 from their networks. The U.K. National Cyber Security Centre (NCSC) confirmed that threat actors exploited the recently disclosed security flaws in Cisco firewalls to deliver previously undocumented malware families like RayInitiator and LINE VIPER. Cisco began investigating attacks on multiple government agencies in May 2025, linked to the state-sponsored ArcaneDoor campaign. The attacks targeted Cisco ASA 5500-X Series devices to implant malware, execute commands, and potentially exfiltrate data. The threat actor modified ROMMON to facilitate persistence across reboots and software upgrades. The compromised devices include ASA 5500-X Series models running specific software releases with VPN web services enabled. The Canadian Centre for Cyber Security urged organizations to update to a fixed version of Cisco ASA and FTD products to counter the threat.
Brickstorm Malware Used in Long-Term Espionage Against U.S. Organizations
The UNC5221 activity cluster, attributed to suspected Chinese hackers, has been using the BRICKSTORM malware in long-term espionage operations against U.S. organizations in the technology, legal, SaaS, and BPO sectors. The malware, a Go-based backdoor, has been active for over a year, with an average dwell time of 393 days. It has been used to steal data from various sectors, including SaaS providers and BPOs. The attackers exploit vulnerabilities in edge devices and use anti-forensics techniques to avoid detection. The malware serves multiple functions, including web server, file manipulation, dropper, SOCKS relay, and shell command execution. It targets appliances without EDR support, such as VMware vCenter/ESXi, and uses legitimate traffic to mask its C2 communications. The attackers aim to exfiltrate emails and maintain stealth through various tactics, including removing the malware post-operation to hinder forensic investigations. The attackers use a malicious Java Servlet Filter (BRICKSTEAL) on vCenter to capture credentials, and clone Windows Server VMs to extract secrets. The stolen credentials are used for lateral movement and persistence, including enabling SSH on ESXi and modifying startup scripts. The malware exfiltrates emails via Microsoft Entra ID Enterprise Apps, utilizing its SOCKS proxy to tunnel into internal systems and code repositories. UNC5221 focuses on developers, administrators, and individuals tied to China's economic and security interests. Mandiant has released a free scanner script to help defenders detect BRICKSTORM. The BRICKSTORM backdoor is under active development, with a variant featuring a delay timer for C2 communication. The attackers have exploited Ivanti Connect Secure zero-day vulnerabilities (CVE-2023-46805 and CVE-2024-21887) for initial access. The attackers have used a custom dropper to install a malicious Java Servlet filter (BRICKSTEAL) in memory, avoiding detection. The attackers have modified init.d, rc.local, or systemd files to ensure persistence on appliances. The attackers have targeted Windows environments in Europe since at least November 2022. The attackers have been linked to other related Chinese threat actors besides UNC5221. The campaign has been monitored by Mandiant since March 2025. The attackers have targeted downstream customers of compromised SaaS providers. The attackers are believed to be analyzing stolen source code to identify zero-day vulnerabilities in enterprise technologies. The attackers use a delay timer to lie dormant on infected systems until a hard-coded date. The malware employs Garble, an open-source tool, for code obfuscation to hide function names, structures, and logic. Brickstorm has been found on VMware vCenter and ESXi hosts, often deployed prior to pivoting to these systems. The attackers use legitimate cloud services like Cloudflare Workers or Heroku for C2 communications. The attackers use dynamic domains like sslip.io or nip.io that point directly to the C2 server’s IP. The attackers favor appliance and management-plane compromise, per-victim obfuscated Go binaries, delayed-start implants, and Web/DoH C2 to preserve stealth. The attackers harvest and use valid high-privilege credentials to appear as routine administrator tasks. The attackers deploy in-memory servlet filters, remove installer artifacts, and embed delayed-start logic to limit forensic traces. The attackers abuse virtualization management capabilities, such as cloning VMs to extract credential stores offline. The attackers deploy an in-memory Java Servlet filter on vCenter to intercept and decode web authentication to harvest high-privilege credentials. The attackers use a SOCKS proxy on compromised appliances to tunnel into internal networks for interactive access and file retrieval.
Supermicro BMC Firmware Vulnerabilities Allow Firmware Tampering
Two medium-severity vulnerabilities in Supermicro Baseboard Management Controller (BMC) firmware allow attackers to bypass firmware verification and update the system with malicious firmware. These vulnerabilities, CVE-2025-7937 and CVE-2025-6198, exploit flaws in the cryptographic signature verification process. The vulnerabilities affect the Root of Trust (RoT) security feature, potentially allowing attackers to gain persistent control over the BMC system and the main server OS. The issues were discovered by Binarly, a firmware security company. Supermicro has released firmware fixes for impacted models, and Binarly has released proof-of-concept exploits for both vulnerabilities. CVE-2025-7937 is a bypass for a previously disclosed vulnerability, CVE-2024-10237, which was reported by NVIDIA. CVE-2025-6198 bypasses the BMC RoT security feature, raising concerns about the reuse of cryptographic signing keys.